Presë me fuqi të serisë J23 J21 me shpejtësi të lartë për punimin e përpunimit të pllakave inox të fletëve metalike

Shtëpi / Produktet / Presë me fuqi të serisë J23 J21 me shpejtësi të lartë për punimin e përpunimit të pllakave inox të fletëve metalike

Scope of application:

The multifunctional combined punching and shearing machine is a manual punching and shearing equipment that integrates cutting, shearing, punching, plate shearing and angle shearing. It uses overlapping two-stage levers, sliders, crankshafts, etc. to drive a 5-station The sliding board moves up and down to achieve a multi-purpose effect. It is widely used in machining, construction, electric power, railway, shipbuilding, automobile and other industries.

Parametrat e produktit

ModelQJ-8BQJ-10BQJ-12B
Shear force360KN500KN900KN
Tool stroke27MM30MM36MM
Number of trips30Times/min30Times/min30Times/min
Fuqia motorike2.2KW/380V3.0KW/380V4.0KW/380V
Pesha e makinës550KG700KG1100KG
Dimensionet900*600*1100MM900*600*1250MM1100*600*1450MM

Machine Part

Machine body

Use rod tightening combination frame structure, with sufficient strength and rigidity;The slider uses rail guide; machine and slider are welded steel, the material is Q235-A, using carbon dioxide gas shielded arc welding, the weld should be ground smooth, no weld slag and streaming scars, remove inner stress after weld.

Oil Cylinder

Solo cylinder structure which is disposed on the upper beam hole, cylinder block uses 45 # forged steel.
Plunger rod surface hardening hardness is HRC45-50. The cylinder finishing by high-precision machine tools, cylinder bore after refining process to increase surface hardness and wear resistance.

Bliwing Cylinder

Domestic famous engines, strong driving force, low fuel consumption, high economic benefits 12F+4R sliding sleeve shift.

Oil Cylinder

Solo cylinder structure which is disposed on the upper beam hole, cylinder block uses 45 # forged steel.
Plunger rod surface hardening hardness is HRC45-50. The cylinder finishing by high-precision machine tools, cylinder bore after refining process to increase surface hardness and wear resistance.

Our Company